Swimmax Eco Heat Pumps showcase an ABS No-Rust Exterior Case. This specific unit is recommended for swimming pools and spas with a capacity of up to 17,000 liters, depending on the pool type, desired use, and prevailing weather in your location. Swimmax Eco Heat Pumps run quietly and economically 24/7, operating at only 50 decibels.
Key Features
-
ABS No-Rust Exterior Case
-
Up to 75% Less Energy Consumption
-
Automatic Heating and Cooling
-
Auto-Flow Switch
-
Eco-Friendly
-
Spiral Titanium Heat Exchanger
-
Smart Defrosting
Product Inclusions
-
Swimmax 7kW Eco Heat Pump
-
2x Barrel unions
-
10m wire cable - controller
-
Australian-compliant power plug and cable
-
Instruction manual
-
Heat pump cover
Heat Pump Installation
For correct installation, Diversion Valves must be fitted for optimal performance. Diversion valves regulate and balance water flow, aiding in the pump's smooth and efficient operation. You can read the complete
Heat Pump Installation Guide and buy a set of diversion kits:
40mm or
50mm.
Diversion Setup
- Diversion valves are mandatory to balance water flow
- Failure to install valves correctly will lead to errors
- Your pump will flow up to 20,000 L/HR or 3-4 times the required maximum rate
- We are unable to help you troubleshoot error codes without a diversion setup
- Set top valve to approximately 50% water flow
- Bottom Valve most important. Set bottom valve to approximately 25/30% water flow (depending on the model)
- Please refer to min/max flow chart for guidance
Read more about Diversion Installation Setup.
Model |
Swimmax 7 kW |
Performance at Air 28°C. Water 28°C. Humidity 80% |
Input Power/ Heating Capacity |
7.5 kW |
Input Current/ Power consummation |
1.34 kW |
COP |
5.6 |
Performance at Air 24°C. Water 24°C. Humidity 70% |
Input Power/ Heating Capacity |
7.35 kW |
Input Current/ Power consummation |
1.33 kW |
COP |
5.49 |
Performance at Air 15°C. Water 26°C. Humidity 70% |
Input Power/ Heating Capacity |
4.9 kW |
Input Current/ Power consummation |
1.14 kW |
COP |
4.3 |
General Info |
Compressor Type |
Rotary / R32 / GMCC (TOSHIBA) |
Voltage / Power Supply |
220-240V/50Hz/1PH |
Rate Current |
5.9A |
Minimum Fuse |
10AMP – 3 pin Plug attached |
Max Pool Volume |
17,000 L |
Water Flow (m3/h) |
2.5-3.7 |
Water Pressure |
12 kpa |
Condenser |
Twist-titanium tube in PVC |
Water Connection |
40mm/1.5"HP |
Fan Qty |
1 |
Fan Speed |
830-870 RPM |
Power Input of fan motor |
80 W |
Noise at 10m |
41 dB(A) |
Noise at 1m |
50 dB(A) |
Heating mode and Auto mode setting range |
15-40℃ |
Cooling mode ℃ setting range |
6-35 ℃ |
Dimension/Weight |
Net weight |
45kg |
Gross weight |
52kg |
Net dimension (mm) |
1000 x 380 x 580 |
Packing dimension (mm) |
1072 x 420 x 590 |
Your item will be shipped to your registered address. Please make sure your delivery information is up to date before checking out, and that you supply an attended address. Please also provide your mobile phone number and the contact number of the delivery address; this will assist with the dispatch and delivery of your item.
Standard Shipping
FREE standard shipping Australia wide on most regular product orders.
- Same / Next Day dispatch
- Delivery on Metro (1-3 Business Days)
- Regional Australia (4-5 Business Days)
Bulky & Oversized Shipping
For Heat Pump & Bar Fridge. Flat Rate shipping cost is calculated at checkout.
- Same / Next Day dispatch
- 3-12 Business Days Delivery
- If you have a business address or forklift on site, please let us know so we can quote the best price.
Free Local Pick-Up / Warehouse Collection
Warehouse Locations
- Chillmax Bar Fridge (Moorabbin VIC, Wacol QLD, & Hazelmere WA)
- Swimmax Heat Pump (Moorabbin VIC)
All Swimmax products are backed by a 1-year onsite and 3-year parts manufacturer warranty. The warranty exceeds the consumer warranties and guarantees under Australian Consumer Law. Warranties are for the original unit owner and authorized resellers in the location where the unit was installed. Premier House warrants all new equipment to be free from defects, including factory-used materials and workmanship, and of acceptable quality and durability in every possible way.
Extended Warranty for $249
-
2-Year Onsite and 5-Year Parts Manufacturers Warranty – Our new extended warranty ONLY applies for items purchased after October 2019 and is specifically noted on your Invoice. It is available up to 90 days after purchase.
-
The warranty period will commence from the date of purchase from Premier House, and NOT the date of installation or first use.
-
Whether to repair, replace, or refund a faulty item is at Premier HouseÂ’s sole discretion.
Return Policy
-
The item must be returned within 30 days after the buyer receives it.
-
The buyer is responsible for return postage costs.
-
You must return items in their original packaging and in the same condition as when you received them. If you don't follow our item condition policy for returns, you may not receive a full refund.
-
Note: If you are in any way dissatisfied or have any issues with your purchase, please contact us through messages for a resolution before opening a return.
Happy customer
By: Graham Lees on 29 December 2023
My family are now enjoying our pool at about 30 degrees. The kids stay in longer and go in more often. It has been a great improvement for us. Highly recommend it. Great after sales service over Christmas with help with the installation setup.
(5)
Write a product review