Swimmax Inverboost Heat Pumps by Premiere House have everything you’re looking for – or should be looking for – in a swimming pool and spa heat pump that pays for itself. Our powerful Inverboost technology gives competitors a run for their money – thanks to its robust, innovative, and reliable functionality.
Ideal for residential and public swimming pools and spas, our heat pumps showcase an ABS No-Rust Exterior Case that is tough and sleek. This premium inverter unit is recommended for pools and spas with up to 150,000 liters capacity. It also returns at least 30 kW in heat output for only 4.73 kW of electricity input. Swimmax Inverboost Heat Pumps can run silently and economically 24/7 in the cold, quietly operating at only 42 decibels.
Key Features
-
Inverboost Technology
-
Up to 15-30% less power consumption
-
ABS No-Rust Exterior Case
-
DC Full Inverter
-
Wi-Fi Control
-
LCD Screen Control
-
Lower GWP
-
Titanium Heat Exchanger
-
Automatic Heating and Cooling
-
Quiet Operation
Product Inclusions
-
30 iPS Inverboost Heat Pump
-
(2x) Barrel unions
-
10m wire cable - controller
-
(2x) Water drainage pipes
-
(2x) Draining plugs
-
(4x) Anti-vibration feet
-
Winter cover
Heat Pump Installation
For correct installation, Diversion Valves must be fitted for optimal performance. Diversion valves regulate and balance water flow, aiding in the pump's smooth and efficient operation. You can read the complete
Heat Pump Installation Guide and buy a set of diversion kits:
40mm or
50mm.
Diversion Setup
- Diversion valves are mandatory to balance water flow
- Failure to install valves correctly will lead to errors
- Your pump will flow up to 20,000 L/HR or 3-4 times the required maximum rate
- We are unable to help you troubleshoot error codes without a diversion setup
- Set top valve to approximately 50% water flow
- Bottom Valve most important. Set bottom valve to approximately 25/30% water flow (depending on the model)
- Please refer to min/max flow chart for guidance
Read more about Diversion Installation Setup.
Model |
Swimmax 30iPS |
Performance at Air 28°C. Water 28°C. Humidity 80% |
Input Power/ Heating Capacity |
28.5-6.8 kW |
Input Current/ Power consummation |
4.75-0.43 kW |
COP |
16-6 |
Performance at Air 24°C. Water 26°C. Humidity 70% |
Input Power/ Heating Capacity |
27.9-6.7 kW |
Input Current/ Power consummation |
4.73-0.43 kW |
COP |
15.7-5.8 |
Performance at Air 15°C. Water 26°C. Humidity 70% |
Input Power/ Heating Capacity |
22.8-5.6 kW |
Input Current/ Power consummation |
4.96-0.78 kW |
COP |
7.2-4.6 |
General Info |
Compressor Type |
Inverter compressor (Mitsubishi Inverter) |
Voltage / Power Supply |
220~240V / 50Hz or 60Hz /1PH |
Rate Current |
21 A |
Minimum Fuse |
32Amp – Hard Wired |
Max Pool Volume |
150,000 L |
Water Flow (m3/h) |
10 |
Water Pressure |
25 Kpa |
Heat Exchanger |
Twist-titanium tube in PVC |
Water Connection |
40mm/1.5"HP |
Fan Qty |
2 |
Fan Speed |
(550-850)*2 RPM |
Power Input of fan motor |
(32-110)*2 W |
Noise at 10m |
≤49 dB(A) |
Noise at 1m |
42-60 |
Refrigerant |
Eco-friendly R32 |
Heating mode and Auto mode setting range |
6-41℃ |
Cooling mode ℃ setting range |
6-35 ℃ |
Dimension/Weight |
Net weight |
130 kg |
Gross weight |
148 kg |
Net dimension (mm) |
1061 x 452 x 1256 |
Packing dimension (mm) |
1127 x 517 x 1425 |
Your item will be shipped to your registered address. Please make sure your delivery information is up to date before checking out, and that you supply an attended address. Please also provide your mobile phone number and the contact number of the delivery address; this will assist with the dispatch and delivery of your item.
Standard Shipping
FREE standard shipping Australia wide on most regular product orders.
- Same / Next Day dispatch
- Delivery on Metro (1-3 Business Days)
- Regional Australia (4-5 Business Days)
Bulky & Oversized Shipping
For Heat Pump & Bar Fridge. Flat Rate shipping cost is calculated at checkout.
- Same / Next Day dispatch
- 3-12 Business Days Delivery
- If you have a business address or forklift on site, please let us know so we can quote the best price.
Free Local Pick-Up / Warehouse Collection
Warehouse Locations
- Chillmax Bar Fridge (Moorabbin VIC, Wacol QLD, & Hazelmere WA)
- Swimmax Heat Pump (Moorabbin VIC)
All Swimmax products are backed by a 1-year onsite and 3-year parts manufacturer warranty. The warranty exceeds the consumer warranties and guarantees under Australian Consumer Law. Warranties are for the original unit owner and authorized resellers in the location where the unit was installed. Premier House warrants all new equipment to be free from defects, including factory-used materials and workmanship, and of acceptable quality and durability in every possible way.
Extended Warranty for $249
-
2-Year Onsite and 5-Year Parts Manufacturers Warranty – Our new extended warranty ONLY applies for items purchased after October 2019 and is specifically noted on your Invoice. It is available up to 90 days after purchase.
-
The warranty period will commence from the date of purchase from Premier House, and NOT the date of installation or first use.
-
Whether to repair, replace, or refund a faulty item is at Premier HouseÂ’s sole discretion.
Return Policy
-
The item must be returned within 30 days after the buyer receives it.
-
The buyer is responsible for return postage costs.
-
You must return items in their original packaging and in the same condition as when you received them. If you don't follow our item condition policy for returns, you may not receive a full refund.
-
Note: If you are in any way dissatisfied or have any issues with your purchase, please contact us through messages for a resolution before opening a return.
SWIMMAX Inverboost 30iPS Inverter Heat Pump
By: ALF DELLA-LIBERA on 2 October 2023
Prior to purchasing this unit, I read all the specifications & details on these units & I was very satisfied with the quality of the unit as I have been an Air Conditioning Technician for over 45 years. I purchased one of these units & when it arrived (within 5 days of ordering) I was very impressed with the quality of the unit & the way it was packaged. The unit is now in operation and I am further impressed with efficiency, heating capacity & operational noise level. The pool water started at 20 degrees Celsius & within 14 hours the temperature is now maintained at a beautiful 28 degrees Celsius. Very Impressed, thanks Premier House
(5)
Write a product review